Revestimentos e tintas para embalagens

Tintas para impressão

Teste nossos novos intensificadores para cura por LED

Está tendo problemas de desempenho com cura por LED? O EBECRYL® LED 03 e o LED 04 aumentam a cura superficial sem perder desempenho, quando curadas com lâmpadas LED UV. Esses produtos são projetados para uso de baixa migração em tintas e revestimentos de embalagens. O EBECRYL® LED 03 foi projetado especificamente para tintas para impressão a jato de tinta e vernizes (OPV), enquanto o EBECRYL® LED 04 foi projetado especificamente para tintas litográficas e com rotulagem favorável, em vez de sinergistas de intensificação padrão.

  • CURA COM LED
  • BAIXA MIGRAÇÃO COM EXCELENTE ADERÊNCIA
  • TINTAS FLEXOGRÁFICAS E PARA JATO DE TINTA

Peça uma amostra grátis

EBECRYL® LED 03

Teste nossos novos intensificadores para cura por LED

La mejor receptividad de tinta en sustratos complicados

Nuestros productos DAOTAN® TW 6490/35WA o DAOTAN® TW 6495/35WA​ brindan una excelente receptividad de tinta cuando se utilizan como imprimadores adhesivos en distintos sustratos plásticos. Permiten que se pueda imprimir sobre plástico y también actúan como barrera contra la migración de PVC. Estos productos tienen un bajo contenido de VOC (compuesto orgánico volátil).

También contamos con soluciones UV. Nuestro UCECOAT 7850 ofrece una buena adhesión a los sustratos de plástico mientras que UCECOAT 2804 ofrece una solución UV de migración baja

  • Excelente receptividade de tinta
  • Excelente aderência a vários substratos plásticos
  • Grande barreira à migração do PVC
La mejor receptividad de tinta en sustratos complicados

Deseja reduzir ou eliminar fotoiniciadores? Teste nossas soluções!

Com a crescente preocupação com a migração do fotoiniciador para tintas para impressão e revestimentos de embalagens, a allnex tem três maneiras de ajudar:
Resinas com autocura EBECRYL® LEO, incrementadores EBECRYL® LED 03 e LED 04 UV LED e o fotoiniciador polimérico EBECRYL® P 39.

 

  • Incrementador UV LED
  • Benzofenona polimérica fácil de manipular
  • Resinas auto-curáveis

Peça uma amostra grátis

EBECRYL® LED 03

EBECRYL® P39

Deseja reduzir ou eliminar fotoiniciadores? Teste nossas soluções!

UV em base aquosa pioneiro para jato de tinta

A tecnologia atual de tintas de impressão para jato de tinta utiliza calor e monômeros monofuncionais para reduzir a viscosidade dos jatos. A água é menos cara, menos regulamentada, não tem odor e pode fornecer baixa migração. A série de produtos UCECOAT® 2800 contém as primeiras resinas UV em base aquosa para uso em tintas para impressoras a jato de tinta

 

  • Custo reduzido
  • Sem odor ou rotulagem
  • Baixa viscosidade mesmo em temperatura ambiente
UV em base aquosa pioneiro para jato de tinta

Qual o seu desafio?

Desenvolver soluções únicas é um esforço mútuo.

Entre em contato conoscco hoje!
Luc, allnex Belgium - TS&BD Specialist

allnex product highlights

Inks

Print Technology Substrate Technology Products Free sample request
Flexo, Inkjet Plastic, Paper/Board Aminoacrylates EBECRYL® 80 Amine modified acrylate providing high reactivity, high gloss and good chemical resistance. 
Flexo, Inkjet Plastic, Paper/Board Aminoacrylates EBECRYL® 85 Low migration amine modified acrylate providing high reactivity with low viscosity. 
Flexo, Inkjet Plastic, Paper/Board Aminoacrylates EBECRYL® 7100 Highly efficient amine synergist providing good reactivity and excellent adhesion to plastics. It can be used as a resin. 
Flexo, Inkjet Plastic, Paper/Board Aminoacrylates EBECRYL® 7110 Effective amine synergist providing good reactivity and adhesion. It is low color, low odor, improved stability and a decreased sensitivity to moisture.  
Flexo, Inkjet Plastic, Paper/Board Aminoacrylates EBECRYL® 7201 Effective amine synergist providing good reactivity and adhesion. It is low odor, improved stability and a decreased sensitivity to moisture. 
Flexo, Inkjet Plastic, Paper/Board Low Energy Booster EBECRYL® LED 03 Low Migration booster to enhance the surface cure in LED cure systems. Allows for faster lines speeds and/or less photoinitiator. 
Litho Plastic, Paper/Board Low Energy Booster EBECRYL® LED 04 Low Migration booster to enhance the surface cure in LED cure systems. Allows for faster lines speeds and/or less photoinitiator. 
Flexo, Inkjet Plastic, Paper/Board Monomer EBECRYL® 118 Monofunctional acrylate monomer providing good reactivity, improved flexiblity, reduced shrinkage, improved adhesion and good moisture resistance. 
Flexo, Inkjet Plastic, Paper/Board Monomer EBECRYL® MPDDA Difunctional acrylate monomer providing good flexibility, weathering and adhesion. It also provides excellent water resistance. 
Litho, Flexo  Plastic, Paper/Board Photoinitiator EBECRYL® P 39 Easy to handle plymeric benzophenone photoinitiator with low odor and less short chain residuals.
Litho, Flexo, Inkjet Plastic, Paper/Board Polyester acrylate EBECRYL® 837 Hexafunctional polyester acrylate providing high reactivity, excellent hardness and good chemical resistance.
Litho Plastic, Paper/Board Polyester acrylate EBECRYL® 896 Low viscosity DPHA that provides high reactivity, excellent hardness, good chemical resistance and very good litho behavior
Flexo, Inkjet Plastic Polyester acrylate EBECRYL® 367 Polyester acrylate used at additives levels to provide excellent adhesion on corona treated polyolefin substrates. 
Flexo, Inkjet Plastic, Paper/Board Polyester acrylate EBECRYL® 130 Cyclic aliphatic acrylate that provides good reactivity, hardness, toughness and adhesion.
Flexo Plastic, Paper/Board Polyester acrylate EBECRYL® 573 Highly flexible polyester acrylate with good shrinkage properties, designed specifically for shrink sleeve label applications.
Flexo, Inkjet Plastic, Paper/Board Polyester Acrylate EBECRYL® 5781 Bio-based polyester acrylate that provides high reactivity, good scratch, chemical and abrasion resistance, and low viscosity 
Litho, Flexo Plastic, Paper/Board Polyester acrylate EBECRYL® 5850 Bio-based polyester acrylate that provides high reactivity, high Tg and good scratch, chemical and abrasion resistance.
Litho Plastic Polyester acrylate EBECRYL® 416 BPA-free Chlorinated polyester diluted in TMPTA providing fast cure and good adhesion to plastics.  Other dilutions are available upon request. Recommended for use in litho inks. 
Flexo, Inkjet Plastic, Paper/Board Polyester acrylate EBECRYL® 810 Low viscosity polyester acrylate with very good reactivity and pigment wetting.
Flexo, Inkjet Plastic, Paper/Board Polyester acrylate EBECRYL® 820 Low Migration hexafunctional polyester acrylate with excellent reactivity. Recommended for use in all flexo and inkjet pigment colors
Litho Plastic, Paper/Board Polyester acrylate EBECRYL® 875 Polyester acrylate that provides low odor, low misting and low tack without the need for filler. It is suitable for high speed litho applications while providing good adhesion.
Flexo, Inkjet Plastic, Paper/Board Polyester acrylate EBECRYL® LEO 10101 Self-curing multi functional acrylate that can be used to replace photoinitiator thereby reducing concerns of migration. 
Litho, Flexo, Inkjet Plastic, Paper/Board Polyester acrylate EBECRYL® LEO 10103 Self-curing multi functional acrylate that can be used to replace photoinitiator thereby reducing concerns of migration. It is recommended to use in combination with amine co-initiator to realize full benefit.
Litho, Flexo   Paper / Board Polyester acrylate EBECRYL® LEO 10801 Hexafunctional polyester acrylate with low odor and low extractables. It is low viscosity with excellent pigment wetting and litho behavior. Recommended for use in flexo and litho inks.
Litho, Flexo  Paper / Board Polyester acrylate EBECRYL® 450 Hexafunctional polyester acrylate that provides high reactivity and very good pigment wetting.
Litho Paper / Board Polyester acrylate EBECRYL® 870 Hexafunctional polyester acrylate that provides high reactivity and very good pigment wetting and litho behavior.
Flexo, Inkjet Plastic, Paper/Board Urethane Acrylates EBECRYL® 8409 Tin-free and low viscosity aliphatic urethane acrylate providing good adhesion and high durability. 
Inkjet Plastic, Paper/Board WBUV-PUD UCECOAT® 2801 Label-free WBUV-PUD with good flexiblity, resolubility and stability for inkjet inks.
Inkjet Plastic WBUV-PUD UCECOAT® 2804 Low migration WBUV-PUD that is tack-free before cure and provides good reactivty, adhesion and good resolubility and stability for inkjet inks.
Inkjet/ Others Plastic Water borne Polyurethane Dispersion DAOTAN ® TW 6450/30WA Highly elastic, excellent hot water resistance and block resistance, quick drying and good pigment wetting.
Inkjet/ Others Plastic Water borne Polyurethane Dispersion DAOTAN ® TW 6490/35WA Universal adhesion to different plastics, clear and high transparency, low thermo-yellowing, very high elongation.
Inkjet/ Others Plastic Water borne Polyurethane Dispersion DAOTAN ® TW 6495/35WA Universal adhesion to different plastics, clear and high transparency, low thermo-yellowing, very high elongation and TEA free.
Inkjet/ Others Plastic Water borne Polyurethane Dispersion DAOTAN ® VTW 6421/42WA Excellent adhesion to a variety of substrates including e.g. paper, easy to re-wet and re-solubilize, highly flexible and solvent free
Inkjet/ Others Plastic Water borne Polyurethane Dispersion DAOTAN ® TW 7000/40WA High chemical and hot water resistance, high Tg, excellent ink receptivity and clear and high transparency. Application to be used in printing inks.
Thermographic All Semi crystalline unsaturated polyester UVECOAT® 9010 Excellent melting behaviour and flow out
Thermographic All Amorphous unsaturated polyester UVECOAT® 3001 Excellent melting behaviour and flow out