Adhesives
|
| SCIGRIP SG100 |
SCIGRIP SG100 Series methacrylate adhesives and two-component, 10:1 mix ratio products for conding thermoplastics, metals, composites and combinations thereof. These bright white, UV resistant products are particularly well suited in color critical applications without compromising physical properties. |
| SCIGRIP SG200 |
SCIGRIP SG200 Series methacrylate adhesives are two-component, 10:1 mix ratio products for bonding composites, thermoplastics, metals and combinations thereof. Minimal surface preparation combined with a choice of 10, 20 and 40 minute working times, provide reduced labor and production cycle time. these products are widely used for marine, transportation and general plastic bonding applications. |
| SCIGRIP SG300 |
SCIGRIP SG300 Series methacrylate adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts. Most metals can be bonded without primer 2. These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. |
| SCIGRIP SG600 |
SCIGRIP SG600 Series methacrylate adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts. These advanced products are designed to meet specific requirements of the transportation industry, including excellent fatigue and shock load resistance. The combination of miniumum surface preparation, and reduced read through makes the SG600 series ideal for a variety of assembly operations. |
| PLEXUS MA300 |
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic and metal assemblies. Plexus MA300 has a working time of 3 to 6 minutes and reaches approximately 500psi in 12 minutes and 1,000psi in 15 minutes at 74 degrees farenheight and 23 degrees celcius. |
| PLEXUS MA310 |
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal and composite assemblies. Plexus MA310 is a medium-curing adhesive system. MA310 offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials. |
| PLEXUS MA422 |
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic and metal assemblies. MA422 is finding wide usage for composite bonding applications in the transportation and marine industries because it requires virtually no surface preparation. |
| PLEXUS MA425 |
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic and metal assemblies. MA425 is finding wide usage for composite bonding applications in the transportation and marine industries because it requires virtually no surface preparation. |
| PLEXUS MA530 |
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal and composite assemblies. This product has been designed for use on large structures where a moderate open time product is needed. Plexus MA530 may be used for composite and metal bonding for small to large structures. |
| PLEXUS MA550 |
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal and composite assemblies. MA550 is the standard for secondary bonding applications in the marine industry because it requires virtually no surface preparation. |
| PLEXUS MA590 |
Two-part methacrylate adhesive designed for struxtural bonding of terhmoplastic, metal and composite assemblies. MA590 has a working time of 90 to 105 minutes and achieves approximately 500 and 1000psi in 5 and 6 hours respecitively at 74 degrees farenheight and 23 degrees celcius. |
| PLEXUS MA2045 |
Formulated as an excellent UV and yellowing resistant, white, two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal and composite assemblies. Combined at a 10:1 ratio, MA2045 White is a rapid-curing system with a working time of 45 minutes. Plexus MA2045 White is the standard choice for composite bonding applications in the transportation industry because it requires virtually no surface preparation and provides a unique combination of excellent fatigue endurance, outstanding impact resistance and superior toughness. |
| PLEXUS PC120 |
A chemical cleaner conditioner designed to improve the lomg term durability of Plexus Adhesives when used for adhering aluminum and stainless steel assemblies. Fast drying at ambient temperatures, parts can be bonded 1 to 3 minutes after the cleaner is applied. Recommended for use with all Plexus adhesives. |
